How to Make Flasdisk As Ram

Adding RAM to stick trick. RAM (Random Access Memory) or often referred to as the memory is an important part of a computer. RAM serves to store and process data or also temporary, also called working storage, which serves as a place meloading programs that we run. Temporary because when the computer is turned off the data will be lost.

When we open an application / program then it will take up the capacity of RAM and a growing number of applications that we are open (load) then it will be able to spend the capacity of the existing RAM. The result is that the computer can be a crash / hang. If it is so, we may lose the data that we have not had time to save on the hard drive and the most annoying we have to reboot the computer and work from scratch again.

To overcome this we usually adding RAM by buying new RAM. For the deep pockets, it is not a problem, which means but instead to a slim pocket it will be a separate issue because it must spend money for it.

There may be more economical solution, ie by optimizing the flash that we have to be used as RAM. Thus, we do not need to spend more money to add RAM. The next problem is whether it can be done? Can, using special software called eBoostr.

Simak

Baca secara fonetik

Beri peringkat terjemahan

Installation Ebooster On Your Computer

First, we must first download the software. To do the download, please here.
Second, after we downloaded the file, double click its file eboostr.exe

Third, select the desired language (in this example I chose the Indonesian language), then click OK

Fourth, click the advanced course to get a window that contains the product license,

Fifth, then click "I Agree" to a window will appear where we would put the installation files on the computer, as below.

Sixth, if you do not want to change, click the "advanced" course to get a window where we will put the application on the Start menu,

Seventh, click on "install" to start the installation eBoostr
Eighth, wait until the installation process is complete. And when it is completed then we will find a confirmation window to complete the installation process that the computer must be restarted.

Ninth, then select "reboot now" then click "finish". Make sure all applications have been closed and all the data we have stored on the hard drive.
Tenth, after the restart means the installation is complete.
Running EBoostr

After the restart and the installation is complete, we can already use the application.
First, run eBoostr by [Start]>> [All Program]>> select eBoostr Control Panel


Second, click the "add" on the menu at the right until the window will appear as below. Select or click on the flash in which we will use as RAM.

Third, select OK and then wait a while because the computer is allocating File Chace on flasdisk,

Fourth, if successful then we will have two RAM, flash and RAM is the RAM itself,
Fifth, completed
By increasing the RAM, the read speed to be increased several-fold,
Oh, yes if you want to stop the stick as RAM then the eBoostr Control Panel, click on the flash RAM and then click the "remove". Wrong!

After that, we will see only the RAM that the "original" course of plasticity

Good luck! 

Sorry .. Download Software Here

Posted in: Tutorials